DIP switches available in piano, rotary, and slide actuator styles
Posted on by
Mr52 Dip Switches. Dip switch Six form-C relay outputs may be used for strike control or alarm signaling Note: The MR52, MR16IN and MR16OUT will only support 2 wire configurations and require the jumper be placed on 2W at the J3 jumper; For EP1502 RS485 points are at TB3 (SIO Port for 2-wire RS-485) on the board
China Mr52 Dip Switch Manufacturers and Factory, Suppliers Shouhan from www.sohantech.com
DIP SWITCHE RELAY STA U LEDs O UTP S Ø .156" [Ø4 0 mm] 8 PLACES C OMMU NICAT PORT, RS-485 POWER IN 12-24V DC INPUTS.50" [12.70 mm] J5, 6 MR52 TWO READER EXPANSION MODULE G: RS-485: RS-485 bus connection to other Mercury modules
China Mr52 Dip Switch Manufacturers and Factory, Suppliers Shouhan
MR52 Address 0 = DIPs 6,7 ON and 1,2,3,4,5,8 OFF MR52 Address 1 = DIPs 1,6,7 ON and 2,3,4,5,8 OFF The first five switched S1-S5 are used for setting the address of the device and the last. Series 1 MR52 Reader Port: via TTL signaling from Series 1 MR52 reader port
Micro MiniDip switch SMD. The MR52 module accepts either 12VDC or 12VAC for power • Simple dip switch device addressing addressable between addresses 0-31 • Identical footprint and interface as the Series 2 MR-52 allowing for a seamless transition from Series 2 to Series 3 • Embedded cryptographic memory chip ensures all local data remains secured while at rest
China Mr52 Dip Switch Manufacturers and Factory, Suppliers Shouhan. DIP SWITCHES OUTPUT RELAYS Ø.156 [Ø4.0] 8 PLACES] INPUTS EARTH GROUND (CONNECTION NOT REQUIRED) DC INPUT POWER This device complies with part 15 of the FCC Rules The MR52 allows for multi-drop communication on a bus of up to 4,000 feet (1,200 m).